onboard GMA950 graphics: works out of the box (and sleeps! But is analog only! Get a Sapphire ATI HD 2600 XT for this Board :-) )
Netkas' PC EFI V8 required to use vanilla/stock kernels
99% working out of the box, besides audio (see left). Running very stable in the end!
ASUS P5K
Intel P35 + ICH9 Chipset
Install Method: Kalway 10.5.1 - upgraded to 10.5.2
BIOS Version: Unknown; Revision: Unknown
Audio: Using onboard with patch
LAN: does not work
SATA & IDE: SATA works, in AHCI Mode
Stable having flashed P5KR bios 403 on P5K using AFUDOS /N to force ICH9 into AHCI mode Now running for week stable with MAXMEM = 3072 in boot.plist, kept crashing without this option with 4GIG of RAM
EFI & Vanilla Kernel
No. LAN doesn't work
Asus P5K-E WiFi/AP
Intel P35 + ICH9 Chipset
WORKS OUT OF THE BOX:
ICH9 6x Sata ports
Jmicron 2x E-Sata ports
Firewire, USB, COM1
WORKS AFTER PATCHING:
Audio=ad1988b stereo analog only
Lan=marvel88e8056
Wifi=realtek 8187l, configured as ethernet and uses Realtek app.
Retail-Leopard-DVD, GUID, pc-efi8, with retail kexts 'remove appleintelcpupowermanagment.kext, add dsmos.kext', only AUDIO/LAN/VIDEO.kexts needs to be added after that, also may add applesmbios.kext for showing right info in system profiler.
Retail-Leopard 10.5.2 + graphics update also work. see netkas.org for howto
YES
On DVD (Kalyway) or patch (iAtkos)
P5K Deluxe WiFi
Intel P35 & ICH9R
Install Method: Kalyway 10.5.1 & Update to 10.5.2 Netkas method
BIOS Version: 705; Revision: Unknwon
Audio: Internal AD1988B only stereo out
LAN1: Realtek, not tested, Shut off in bios
LAN2: Marvel Yukon on interl PCIe bus filly works
WLAN: Doesn't Work
SATA & IDE: Both SATA controllers fully work, IDE never tested
EFI & Vanilla Kernel Work
Some problems
P5KC
Intel P35 & ICH9
Install Method: Kalyway 10.5.1 and 10.5.2 Combo Updater
BIOS Version: 2602 or 0903; Revision: Unknown
Audio: ACL883 Tarugas patch or ALC883 driver on install DVD
SATA & IDE: SATA works, IDE not tested
LAN doesn't work.
Onboard WiFi works
For some people, install the new kernel before the update
System Profiler unstable (Need patch from 10.4.10)
PC_EFI_V8 + Grub, Vanilla Kernel
No
P5K-SE
Intel P35 & ICH9
Install Method: Kalyway 10.5.1 and 10.5.2 Combo Updater
CPU: Enable apic2.0, disable c1e in Bios.
Audio: HDAPatcher with alc883 dump (only tested analog stereo and line-in).
LAN: Onboard doesn't work, had to use D-Link DGE530T 1GigE with skge-e.kext (Driver from D-Link website doesn't work).
SATA & IDE: SATA works with memory remap disabled in bios, IDE untested.
USB: Requires legacy support to be disabled in bios.
Optical Drive: USB Optical Drive
Graphics: Point of View Nvidia 8800GTS with nvinstaller 0.33 - 1920x1200 with full Quarts Extreme and Core Image support (QE/CI). -- Had to replace old Nvidia 6800GT because QE/CI acceleration wouldn't work in Leopard.
Yes
No, onboard lan doesn't work.
P5W DH Deluxe
Intel 975X & ICH7R
Install Method: Kalyway 10.5.1 and 10.5.2 Combo Updater
BIOS Version: 2602; Revision: 1.04G
Audio: Realtek ALC882M works
LAN: Marvell 88E8053 both ports work out of box
SATA: all port works, ICH7R IDE works, Jmicron IDE does work (non atapi device as indicated in manual)
Onboard WiFi does work, with realtek 8187 drivers.|
ez_raid ports work out of the box, natively. Raid0 works natively.
P5W DH Deluxe
975X, ICH7
Install Method: Retail disc image from separate installation, update to 10.5.2 via this guide. remove: AppleIntelCPUPowerManagement, AppleEFIRuntime. add: dsmos, ALCInject, Jmicron (optional). replace: AppleHDA, IONetworkingFamily, AppleSMBIOS. kexts here
BIOS Version: 2004 ; Revision: unknown
Audio: Realtek 882
LAN: Marvell Yukon 88E8053
SATA & IDE: SATA works out box, jmicron controller works with patch.
ComboUpdate method, be prepared for several lengthy reboots. Relax & just let it run.
P5B Deluxe BIOS Ver.1226 (latest available from ASUS)
Audio: AD1988B 8-channel High Definition Audio still not working after update (patches not tested)
JMicron JMB363 SATA / PATA controller NOT TESTED (2 x External SATA 3.0 Gb/s ports)
Intel Matrix Storage Technology (RAID) controller not recognized by OS X
All six (6) SATA 3.0 Gb/s internal ports tested working in ACHI (after upgrade)
IDE mode NOT TESTED
Marvell Gigabit LAN Port 1 working; Port 2 still not working (patch not tested)
All ten (10) USB 2.0 ports working
All PCI Slots working
Both (2) FireWire ports working (TI 1394a controller)
Partitioned as MBR using EFI bootloader
TimeMachine working
Software RAID drives created w/ DiskUtility still working fine after upgrade
EFI v8 + Vanilla Kernel
No; Onboard Audio and LAN port 2 need patches
P5B
Intel P965
Install Method: Kalyway 10.5.1, ComboUpdate + Kernel Patches applied in 10.5.1 or "Onetrack�s perfect install" works with ToH RC2 which is a lot of work
BIOS: Unknown
Audio: works after upgrade, needs patch in 10.5.1
Storage: ACHI working; Install from IDE not working, install to IDE unknown
LAN: Working
Partitioned as MBR using EFI bootloader
Onetrack:
Audio: Needs editing or patching AppleAzaliaAudio.Kext, audio in not supported
LAN: Works OOB
SATA & IDE: Works OOB (JMicron IDE works OTB with Kalyways install Disc, otherwise JmicronATA.kext needs editing)
EFI & Vanilla Kernel
No, Patches applied in 10.5.1
P5B
Intel P965
Install Method: iAtkos 1.0ir2, no luck with Kalyway
BIOS Version: 1202, had to downgrade using CrashFree BIOS
Bios options: Max CPUID disabled, Memory remap enabled, Execution bit enabled
Audio: works OTB
LAN: works OTB
SATA & IDE: Used SATA HDD + SATA Optical, enabled AHCI, disabled JMicron IDE
Partitioned with MBR with Darwin bootloader (EFI failed)
Non-vanilla kernel 9.2 (ToH) after Kalyway's ComboUpdate to 10.5.2
Reboot and shutdown are buggy, have to boot sometimes with: "-v -x -legacy" after bad shutdown/reboot.
MBR + Non-vanilla kernel
Yes, no patches required
P5B
Intel P965
Install Method: iAtkos 1.0ir2
BIOS Version: 1803
Bios options: Max CPUID disabled, Memory remap enabled, Execution bit enabled
Audio: works OTB
LAN: works OTB
DVD: Installed with USB2 Adapter for DVD-ROM, after install put back on IDE
HDD: 320 Sata HDD for Vista and Ubuntu, 100 Pata with Vantec Sata converter for OSX, enabled AHCI
Partitioned with MBR, used GRUB to load PC_EFI in Ubuntu
Vanilla kernel with 10.5.2 and all updates
Front USB (USB 7 and 8) not working (investigating now)
MBR and EFI + Vanilla kernel
Yes, no patches required
Asus P5GC-MX
Intel P965 + ICH8 Chipset
HD fresh install with GUID using Disc Utility
iATKOS v1.0i SSE3 with vanilla kernel 10.5.1
Used PC_EFIv8 for GUID booting
Updated to 10.5.2 using the original Apple combo update but using Devil's procedure on insanelymac
Onboard LAN doesn't work
Audio works with HDAPatcher ALC883.
YES
Audio needs patching
Asus P5GC-MX/1333
Intel 945GC Express Chipset
Upgraded from Kalyway 10.5.1 to 10.5.2 using /"kalyway_hack_10.5.2ComboUpdate/"
Onboard LAN doesn't work
Audio works with HDAPatcher ALC883.
YES
Audio needs patching
P5LD2-VM SE
Intel® 945G / ICH7
Install Method: Retail DVD & web update to 10.5.2(Netkas Method)
BIOS Version: 0602
Audio ALC 882: Works with patch
LAN: Works out of the box
SATA & IDE: Works out of the box
PC-EFI-V8 + Vanilla Kernel work
Audio needs Patching, and couple of kext removed/replaced.
Type "dd if=./guid/boot1h of=/dev/rdiskXsY bs=512 count=1" (X is the disk number and Y is the partition number on which you installed Leo)
Type "dd if=./guid/boot0 of=/dev/diskX bs=400 count=1"
Type "./startupfiletool -v /dev/diskXsY ./boot_v8"
EFI v8 Works
Audio & LAN need patching
A8N-SLI
NVIDIA nForce4 SLI
Install Method: Zephyroth 10.5.2
BIOS Version: 1604; Revision: Beta
Audio: Realtek ALC850 (Selected AC'97 from Customize list)
LAN: nForce4 built-in Gbit MAC (Selected forcedeth from Customize list)
SATA & IDE: Installed OS onto IDE drive without problems. Also have two SATA drives in Striped RAID configured through MediaShield ROM, but the RAID showed up as two individual drives in Mac's Disk Utility during installation. Cannot access RAID even after installation.
Optical Drive: BenQ DW1625. During the 15 odd times I booted from the DVD to install, after the first 6 or 7 times, the installer started saying that it could not read from the disc. This was happening when it normally would check the media for errors. So, I re-burned a new disc using the same drive of the same ISO(which I had initially created from the original (now problematic) disk). The new disc worked. Maybe, just a very fragile disc. But, weird.
Shutdown and reboot works. Sleep gives a blank (black), unresponsive screen. Have to hard reset.
Had to run the installation, with the same options, multiple times for it to get it right. After a few installs, I was getting the gray screen asking me to restart the computer. I really don't know how I got around that problem. I just installed again without changing any options. Finally, when it worked, I had my ethernet cable unplugged. In the Customize list, I had chosen the nforce chipset 2/3/4/5 kext, AC '97, forcedeth, nvidia geforce 10.5.2 and nvinject 128 MB for my 6600GT graphics card. Name of volume: Leopard. I chose the EFI v8 plus MBR bootloader to make the "Leopard" volume bootable. I'm using grub to choose between my various OSes. SSE3 9.2.0 TOH Kernel chosen from the Customize list.
EFI: Since I installed using Zephyroth's 10.5.2, I'm assuming it installs EFI by default?
Yes, everything works without patching. No flags needed while booting.
A8N-VM
nForce 410
Install Method: Zephyroth Leopard 10.5.2 for AMD
BIOS Version: 0902; Revision: Unknown
Audio: ADI AD1986A works with ALC888 patch and no input
LAN: Works with Zephyroth patch in installation
SATA & IDE: Works with Zephyroth patch in installation
partitioned as MBR
EFI works
Audio & LAN need patching
Crosshair AM2
nVidia nFocre 590 SLI MCP55
Install Method: Zephroth AMD SSE3 9.2.0 Kernel
BIOS Version: 0702; Revision: Unknown
Audio: Works with AzailiaHD from install DVD
LAN: Doesn't Work - OSX detects them with Forcedeth and they have MAC addresses however they will not detect Ethernet cables
SATA & IDE: Both Work
To avoid "Still Waiting for root device," have an IDE HD and optical drive plugged in and install on SATA
Needs boot hang fix if using GUID - same as Asus A8N-E NFORCE4
EFI v8 Works
LAN doesn't work, Audio needs patching (reinstall AzailiaHD after 1st boot)
Generic Drive Support. LightScribe working w/ appropriate software
Yes
CD/DVD-RW Drive
Samsung SH-S203D
Samsung (TSSTcorp)
Generic Drive Support.
Yes
3G Mo
PORTABLE COMPUTERS
Asus
Z53T
Install Method: Zephyroth AMD 10.5.2 rev. 1
Processor: AMD TURION 64 X2 TL56 1,8Ghz
GeForce GO 7300 fully works with NvInject GO
Atheros wi-fi working out of the box
SATA works with MeDevil driver . . . .
Z71V
Install Method: Kalyway 10.5.1, then Kalyway Combo 10.5.2 Update, then Netkas Universal 9.2 kernel (10.5.1 seemed to need installing about 3 times before being successful, don't install additional drivers only the EFI mbr boot option)
CPU: Intel Pentium M 2.00 GHz (which has SSE2 not SSE3) (Speedstep appears to be working)
Chipset: Intel 915
VGA: NVIDIA GeForce 6600 Go 128MB. CI/QE working, using NVinject. All resolutions supported, fast and no glitches.
Lan: Marvel/Yukon chip. Using skge.kext
WiFi: Intel 2915ABG drivers not so good, so replaced card with Atheros AR5212 (AR5005G) which works with inbuilt 10.5.2 drivers and supports WPA.
Sleep: Shuts down fine, but sleep won't use S3 only S1 and can't get hibernate to work.
iCal requires Rosetta setting. 10.5.2 update produced long boot times but a bit of ammendments mentioned in the forums fixed the boot times to a very quick time. . . . .
Acer
Aspire 5100
Install Method: Zephyroth AMD 10.5.2 (patched although it most likely will work non -patched)
* Install Method: iatkos 10.5.1 w/ EFI. updated to 10.5.2 using combo update and kernel update obtained from TPB. DO NOT DO GRAPHICS UPDATE, it will kill your display. * Processor: Intel T2080 1.73GHz both cores work =) * Intel High Definition Audio works, no mic, spdif works. Havent tweaked mic may possibly work after tweaks * LAN detected, not tested though. * Wireless works out of the box. * GFX works out of the box, GMA 950 * Flash Card reader doesn't work no big deal * DVD Burning works natively. * Bluetooth doesn't work. searching for solution haven't found one yet, Bluetooth dongle works though * Webcam works with everything except photo booth * No powermanagement (No battery meter, no sleep). I haven't tweaked it yet though, it may be possible. * All and all...Everything that needs to work...WORKS :) play games perfectly with this laptop :) . . .
Clevo
M570RU
This laptop is sold by a lot of manufacturers, most notably Sager (NP5790v). Use CPU-Z or look at the sticker on the bottom, it will have M570RU somewhere.
Install Method: Kalyway 10.5.1 (Vanilla Kernel + ACPIFix + Realtek 883 + efi_mbr selected) then Kalyway Combo 10.5.2 Update and Kalyway 10.5.2 Kernel Patch (vanilla), then everything except the graphics updates via Apple Software Update
Installed on disk0s3, selected (MBR, third partition on system HD)
Dual (Tri?) Boot with XP32 and 64 using either Darwin bootloader or Windows/Chain0, both work
Audio: Realtek 883, Works OOB (with the 883 driver selected on Kalyway install)
LAN: Realtek 8110/8169 Gigabit, Works OOB
Video: nVidia GeForce 8800m GTX 512 MB - black screen of death ("you have to restart your computer") when selecting any of Kalyway's graphics drivers or none; workaround: don't install any, then use -x to boot up after OS installation and run NVInstaller, select the correct amount of video memory - fully HW accelerated, QE/CI, no artifacts or glitches
SATA & IDE: Intel ICH8 SATA works OOB, no IDE in laptop
ExpressCard slot is recognized, no cards to test
Battery charge worked in 10.5.1 with replaced kext - not anymore in 10.5.2 - Time Machine works
Speedstepping doesn't work - unless the kext is removed, system is very unresponsive
Screen Saver/GL acceleration works
Sleep works but wakeup only works once, on successive attempts it freezes either when going to sleep or when waking up again
Not working
Wlan: Intel 4965 AGN
Camera: D-Max STK-1135 . . . .
Compaq
Presario V3431TU
Install Method: Kalyway 10.5.1, Combo Updater, and new Kernel
EFI v8 & the Vanilla Kernel work
Chipset: Intel 945 Express
Processor: Intel Core Duo T2450 2.0GHz (working but with frequent pauses/hangs even when flagged with "cpus=1" at boot)
Audio: Works with Azalia kext, only line out
LAN: Intel pro 100/VE, Works well but with a downside; kernel panic upon restart when cable is unplugged. solution is to turn off ethernet every restart when you plan to unplug the cable
WLAN: Intel 3945 doesn't work
Video: GMA950 working with QE & CI, glitches fix with patch, see below
Modifications/Patches:
macdotnub's AppleSMBIOS.kext (displays correct info at System Profiler also shows as macbook instead of mac pro)
Paulicat's version of Natit.kext found here, updated without trouble to leopard graphics update 1.0 then installed Natit.kext, fully working still with CI & QE, graphical glitches appear to be gone
PS2 Keyboard and Touchpad - need patching before upgrading to 10.5.2
Sound : Sigmatel 9200 - need patching of original AppleHDA.kext with Taruga's v1.20 & SIGMATEL9200.txt dumpcode (microphone not working, but front buttons do)
Mini PCI-e wireless card - Dell Wireless 1500 draft N (NJ449, rev A01) - fully working
NOT WORKING PARTS - original Intel 3945 a/b/g wireless card and RICOH 3 in 1 Card Reader . .
Use this utility (Kext Helper) to install kexts here
Updated kernel to SpeedStep 9.2 and Netkas new AppleSMBIOS.kext from here and instructions and files from: here
Updated graphics, iTunes, etc., directly from Apple's website without any problems
Battery charge, Airport, Time Machine, indicators appears in menu bar
Speedstepping works
Screen Saver works but graphics don't move
Sleep works but wakeup doesn't .
Latitude D620
YOU MUST SET CPU TO SINGLE CORE IN BIOS. Graphical Corruption and instability results from having dual core enabled.
Install Method: Previously install Kalyway 10.5.1, then ran Kalyway Combo 10.5.2 Update. Then updated Kernel to 9.2.0 using Kalyway Kernel Update
Processor: Intel Core 2 Duo 1.67 Ghz (Dual core, SS3 - only one core properly works)
Audio: Sigmatel 9200 works with AppleHDA patcher & Stac9202.txt
Video: Integrated Intel GMA950 fully working with no tweaks needed
SATA & IDE both working by default
Dell Truemobile 1390 Wireless works by default. Intel Wireless Card currently not working.
Battery icon appears and functions correctly with updated PowerBundle.kext
Vostro 1500
Install Method: iATKOSir2 + Kalyway 10.5.2 Combo Update + Kalyway 9.2.0 Vanilla Kernel, along with GUID partition & EFI
BIOS Version: A04, SpeedStep disabled
Processor: Intel Core 2 Duo T5270
Audio: Sigmatel 9228 works with AppleHDA patcher & Stac9205.txt
LAN: Select Broadcom 440x in iATKOS installer
Video: NVIDIA 8400M GS 128MB fully works (including QE/CI) with johnnycarcingen's NVInstaller v.33
SATA & IDE: SATA works OOB
Dell Trumobile 1490 Wireless works OOB
Dell 355 Internal Bluetooth 2.0 + EDR works OOB
Card Reader doesn't work
XPS M140
Install Method: Kalyway 10.5.1, Virginizer, and then Combo Update
Processor: Pentium M Dothan 1.86Ghz
Revision: A04
Audio: AppleHDA patcher with stac9200-i.txt
LAN: Worked OOB in 10.5.1, after update, needed to replace IONetworkingFamily.kext from 10.5.1
Video: Onboard Intel GMA900 works, QE isn't supported
SATA & IDE: Does SATA work? Any options in BIOS or Patches? Same thing with IDE
Wireless: Intel 2200bg works by downloading iwi2200.zip for Leopard. Installed iwi2200.kext along with Networkselector and NSGUI which can be found by searching the forums. Wireless works only on untrusted open networks.
No drivers selected during install
Partitioned as GUID with no Vanilla Kernel, SSE2 Kernel .
XPS M1730
Install Method: Kalyway 10.5.1 and Combo Updater
Processor: Intel Core 2 Duo 7700 2.4GHz
BIOS Version: A06
Audio: Works with patch
LAN: Zydas USB2.0 wlan
Video: Dual 8700M with Nvinject, No OpenGL
SATA & IDE: SATA is fully working . . . . .
Fujitsu-Siemens
Amilo Pi1536
Install method: iAtkos v1.0i with EFI + Kalyway Combo 10.5.2
ATI X1400 OpenGL & Quartz Extreme with mouse stuttering (changed IOPCIMatch key in ATIRadeonX1000.kext/Contents/Info.plist to 0x71451002, but resolution only 1024x768x32bit)
LAN working
Card Reader working
Intel Wireless not working (iwi3945.kext, driver exist but the are crash system, kernel panic )
The problem is slow boot because IOKitWaitQuiet (I don't search how resolve to this problem yet).
ESPRIMO Mobile V5505
Install method: iAtkos v1.0i with EFI + Kalyway Combo 10.5.2
Dual Boot with Vista using Darwin
BIOS version A0Z
Audio working (headphones not working)
LAN working
X3100 graphics FULLY working with the driver provided with iAtkos
Intel Wireless not working (driver does not exist - replaced with broadcom 4311 (this one was from HP Pavilion dv6000 - working OOB))
Audio: Realtek High Definition Audio (ALC888), AppleAzaliaAudio.kext & AppleAzaliaController.kext
LAN: Intel PRO/100 VE, AppleIntel8255x.kext (Mod-IOPCIMatch: 0x27dc8086)
SATA & IDE: Works `Out of Box` -See Note Below
Installer will not recognize any storage devices unless configured in BIOS to IDE, AHCI will work once installation is finished. Kernel seems sensitive to Boot Disk Priority Configuration and will have random kernel panics at boot if system disk is not in the proper order of which the disks are connected to their respected ports (BLP0SD2). Sleep mode does not always work and may crash. Hard Disk Spin Down functionality is abnormal (Continuous Spin-Spin Down at irregular intervals without reason.) . .
Install Method: Kalyway 10.5.1, then to 10.5.2 (using Kalyway's combo update and kernels)
Board: ASUS P5BW-LE
Chipset: P965
BIOS Version: 5.08
Processor: Intel Core 2 Duo E6400 (2.13 GHz)
Audio: Realtek High Definition Audio, working (using Azalia drivers presented during Kalyway install)
LAN: Onboard Intel 82562v ethernet doesn't work; removed internal PCI modem to install Netgear Gigabit PCI Adapter (GA311), which works out of the box
SATA & IDE: Works out of box (see below)
BIOS needed to be set to AHCI and not RAID in order to boot from Kalyway 10.5.1 DVD, otherwise it just hangs at the gray Apple logo. Dual internal hard disk drives: 1) Vista install (C:) w/ HP recovery partition (D:) and 2) (E:) Dedicated solely for OS X, which was partitioned as MBR. Booting back to Vista requires BIOS to be set back to RAID.
Others
MSI Barebones MPC 945
Install Method: Leo4all 10.5.2, GUID drive install, Kernel 9.2.0 (Vanilla 9.2.0 does not work), SMBIOS 3/17/08
Audio: Does not work :-(, using USB adapter for headphones
LAN: Does not work, using USB adapter
WAN: Intel card does not work, replace with Lenovo atheros card or use USB adapter
Video: Fully working
SATA: Works great
Power Management: battery meter works with patch, sleep works, no SpeedStep so far
On the first boot after install this computer locks up, the problem is the IntelGMA kexts. To fix it boot into safe mode using -x. Install the Apple Graphics Update(you'll need a usb network device), remove /System/Library/Extensions/AppleIntelGMA950*, and AppleIntelIntegratedFramebuffer. We wont be needing those as we have the X3100 video. Find and install the Natit kext which helps with video.
Processor: Intel Celeron M 430 (1.73ghz) Core Solo Yonah
Chipset: Intel 945GM1940GML
Video: Intel GMA 945 - Works with QE/CI enabled, can change resolutions for the internal and external monitor. Minor mouse tearing / artifacts in Firefox 3 and MS Office. Quake 3 works great. S-Video TV Out doesn't work, stays at blue screen when booting.
Audio: Realtek ALC883 - Works with headphones or external speakers, mic-in not tested. There's a way to enable internal speakers with a patch but then line-out doesn't work. SPDIF Not tested.
LAN: Realtek 8139 - Works OK.
Wi-Fi: Intel PRO/Wireless 3945ABG - NOT WORKING
Touch pad: Works OK.
USB ports: All working. Tested with Logitech MX518, A4Tech Spanish Keyboard (all keys detected) and Sony Ericsson Z550a.
Power Management: Sleep works OK, but sometimes I get choppy sound afterwards. Battery meter missing (worked OK in iatkos 10.5.1).
SATA: Works OK.
Samsung
Samsung X11 cv02
Install Method: Kalyway 10.5.1 & Combo Update (PCEfi v8 and vanilla kernel with ACPI fix)
For Update to 10.5.2: Be sure to take a backup of your /System/Library/Extensions directory, as the 10.5.2 AppleACPIPlatform.kext stopped my keyboard and pointer working (even in single user mode). fixed by booting -s from install DVD and reverting to backed up 10.5.1 kext.
Laptop runs hot. Fan speeds appear to be changed in response to cpu load. No idea if speedstepping is active.
'About this Mac': crashed every time it was loaded. problem fixed with AppleSMBIOS fix (found on insanelymac)
Sony Vaio VGN-NR260E/W
Install Method: iATKOS v 1.0i r2 & Kalyway Combo Update, 9.2 kernel by Kalyway
Ubuntu LiveCD cfdisk type = af partition format PC_EFI v8, GUID bootloader, NO VIDEO KEXTS (wait to use those from Graphics Update), vanilla kernel with ACPI, boot_v8 added to grub
Chipset:Intel 965GM/ICH8M
Processor: Intel CoreDuo T2330 1.60Ghz
Video: GMAX3100 works, full QE/CI (with Graphics Update+paulicat's Natit.kext+Switchresx, install all THEN reboot, else screen is rubbish)
Toshiba Bluetooth does not work(showed up only once after 10.5.2 Update then had now shown again)
SAN DISK Drive does not work . . . .
Satellite Pro A100-830 PSAACE 00W002EN
Install method: Used Kalyway 10.5.1 DVD followed by the Kalyway 10.5.2 combo update using the modbin 9.2 kernel (I tried vanilla 9.2 but it caused endless reboot cycle)
Warning: I stupidly installed the Leopard Graphics Update 1.0 and it caused black screen boots with no safe mode possible. Had to fix by booting install disk, going to terminal and removing all graphics related kexts. Best avoid this update on this machine.
Processor: Intel Centrino Duo T7200 2 Ghz (detected as 1 CPU 2 cores at 1.99 Ghz)
Chipset: Intel® 945PM Express
Display: 15.4" TFT Display 1280 x 800
Video : ATI Mobility Radeon X1600 256 MB (0x1002 0x71C5)
Video: working, need an external monitor to install
How to install: (If anything major, not the basics)
1) install Kalyway 10.5.1, vanilla kernel and mbr; 2) reboot and boot with -v -s option; 3) delete AppleIntelIntegrated.kext 4) reboot with external monitor connected; 5) boot with -v -s and run command "touch /var/db/.AppleSetupDone"; 6) run command "passwd" and choose a root password; 7) copy natit.kext to Extensions directory; 8) in file Info.plist of AppleYukon2.kext change 8053 to 8039 and 4362 to 4353 9) 10.5.1 should be working now; . . 10) download Kalyway 10.5.2 upgrade and install 11) if you get error 35.. hostname.. go to Preferences>Sharing and set a Computer name 12) if wired ethernet is not working, copy the IONetworkingFamily.kext from the 10.5.1 install; 13) install the driver from Realtek RTL8187B 14) change 33161 to 33175 . . . . . . . . .
Satillite M105-S3004
Install Method: Kalyways's 10.5.1 with 10.5.2 Update
